Looks like this will be an interesting experiment - from the Max Planck Institute for Plasma Physics
The first plasma: the Wendelstein 7-X fusion device is now in operation
Following nine years of construction work and more than a million assembly hours, the main assembly of the Wendelstein 7-X was completed in April 2014. The operational preparations have been under way ever since. Each technical system was tested in turn, the vacuum in the vessels, the cooling system, the superconducting coils and the magnetic field they produce, the control system, as well as the heating devices and measuring instruments. On 10th December, the day had arrived: the operating team in the control room started up the magnetic field and initiated the computer-operated experiment control system. It fed around one milligram of helium gas into the evacuated plasma vessel, switched on the microwave heating for a short 1,3 megawatt pulse – and the first plasma could be observed by the installed cameras and measuring devices. “We’re starting with a plasma produced from the noble gas helium. We’re not changing over to the actual investigation object, a hydrogen plasma, until next year,” explains project leader Professor Thomas Klinger: “This is because it’s easier to achieve the plasma state with helium. In addition, we can clean the surface of the plasma vessel with helium plasmas.”
The first plasma in the machine had a duration of one tenth of a second and achieved a temperature of around one million degrees. “We’re very satisfied”, concludes Dr. Hans-Stephan Bosch, whose division is responsible for the operation of the Wendelstein 7-X, at the end of the first day of experimentation. “Everything went according to plan.” The next task will be to extend the duration of the plasma discharges and to investigate the best method of producing and heating helium plasmas using microwaves. After a break for New Year, confinement studies will continue in January, which will prepare the way for producing the first plasma from hydrogen.
Sustainable commercial fusion power has been about five years away for the last fifty years. It will be interesting to see if this one advances the technology.
The big international ITER project is a design that is known to have confinement issues and its construction is not even completed yet. The Farnsworth fusor is a good design and Robert Bussard's group at EMC2 is doing really good work (here, here and here).
Leave a comment